MAIN CHARACTERISTICS

DIMENSIONS

SPEED & RANGE UNDER POWER

CAPACITIES

ACCOMMODATION

• OWNER’S CABIN

  • With a double berth offset from centerline, settee, dressing table, a large hanging locker and abundant drawer and locker space. Stainless steel steps with wooden treads to starboard lead up to a private companionway, giving access to the aft deck via a sliding hatch. Desk/vanity with USB ports and carpeted sole.

• STARBOARD AFT GUEST CABIN

  • Twin berths with a Pullman convertible berth inboard and hideaway pipe berth with 2″ mattress, outboard
  • Hanging locker, drawer storage and carpeted sole

• PORT AFT CABIN

  • Twin berths with a Pullman berth inboard and hideaway pipe berth with 2″ mattress, outboard
  • Hanging locker, drawer storage and carpeted sole

• MAIN SALOON

  • Light, spacious and located to port, this upper saloon features a 4-sided wraparound settee surrounding a rectangular, expandable table of Birdseye Maple with padded cover on a large pedestal base. Hatches for light and ventilatio

• LOWER SALOON

  • To starboard with L-shaped settee and coffee table of custom Birdseye Maple, with padded cover. Bar area aft with stowage for glasses and bottles. Glass locker and bookcase.

• GALLEY/PANTRY

  • To port. Generous worktop space and abundant lockers for stowage. Slide-out baskets with sea loCK, spice rack and knife rail. Slide-away smoked Perspex pocket door can be used to isolate galley from lower saloon.

• CAPTAIN’S CABIN

  • To starboard with double berth
  • Hanging locker, drawers, shelving and cubbies
  • Hatch for light and ventilation

• CREW

  • To port, with upper and lower berths
  • Hanging locker, cabinet and bookshelves
  • Overhead hatch for light and ventilation
  • Bosch washer and dryer

• ENGINE ROOM

  • With sound insulation, accessed from aft passageway, with 22OV and 24V lighting and (2) ACI VB16 extractor fans. Jabsco 100mm heavy-duty air intake

MECHANICAL EQUIPMENT

SAILS & RIGGING

NAVIGATION EQUIPMENT

DECK EQUIPMENT

ENTERTAINMENT EQUIPMENT

GALLEY & LAUNDRY EQUIPMENT

SAFETY & SECURITY EQUIPMENT

TENDERS & WATERSPORTS EQUIPMENT

REFIT & MAINTENANCE NOTES

• 2023-2024:

  • New floorboards and floor sole varnished, all cabins
  • New fridge compressors
  • New Starlink system
  • New Pepwave internet (May 2024)
  • Resealed backstay hydraulics (May 2024)
  • Full annual inspection for both generators, and engine (May 2024)
  • New AC units in crew area, lower and upper saloon
  • Starboard and port generators serviced. New water pumps, circulation pumps and heat exchanger (June 2024)
  • Main engine serviced by Cat (June 2024)
  • Newport Rigging Group, Rig inspection (July 2021)
  • Quantum jib and main sails serviced

• 2022:

  • Interior varnished
  • Hard frame bimini installed
  • New engine R installed
  • New cutlass bearing
  • Prop shaft repaired
  • Keel dropped and keel bolts resealed
  • Bow thruster pod serviced
  • Updating linens
  • Carpets replaced
  • New washer/dryer. GE GFQ14ESSNWW
  • New drink fridge. Monogram ZIBS240NSS
  • New wine fridge. Edgestar CWF380DZ
  • Port raw water manifold replaced (stainless box)

• 2021:

  • Bottom was media blasted
  • Topsides faired with Awlfair and painted with Awlgrip flag blue with the HOT clearcoat
  • Custom underwater light housings, lmtra LM600369 controller, and four lmtra LM600316 lights
  • New helm panels
  • Stainless steel swim platform bars
  • Toe rail was stripped down and built up with varnish
  • New cockpit cushions
  • New dodger
  • New through hull and seacock for starboard raw water intake

• 2019:

  • Replaced interior cushions and soft goods
  • New mainsail, 135% genoa, staysail, and spinnaker from Quantum Sails.
  • Rigging was re-headed with some components replaced by Rig Pro and BSI
  • Mast and boom painted with Awlgrip
  • A/V system upgraded. Sanos installed throughout boat and Samsung NU7100 series TVs installed
  • Galley countertops replaced with corian
  • Miele KM 7201 FR induction hob installed
  • Replaced starboard generator with a new 27Kw Onan MDKS-1415591
  • New Kymeta U7 VSAT antenna, Kerio NG300W control box, Cisco 581 wireless-AC/N access points, and Cisco SG250-26HP network switch installed
  • Serviced aqua drive and replaced turbo on main engine
  • Updated interior linens
  • Carpets replaced
  • HRO Seafari 58GPH modular Watermaker installed
  • Docklines, sheets, and halyards replaced with Marlow ropes

• 2017:

  • New air-conditioning units, ducting and controls
  • Refurbished dishwashing machines
  • Refurbished water maker, including plumbing
  • Re-plumbed parts of water system
  • Resealed backstay hydraulics
  • Repainted engine
  • Full annual inspection for both generators, and engine
  • Replaced water pressure pump switch on both generators, replaced the water pump impellers on all engines
  • Replaced thermostats on gen sets and engine
  • Cleaned fuel system, including Racors
  • New zincs
  • Pressure tested all oil coolers, heat exchangers inspected for tolerances and timing
  • New 110 volt engine room lights Please initial and date.
  • New padding in engine compartment
  • Refurbished portion of leather interior cushions in saloon
  • Vacu-washed sails
  • Replaced chaffed reef line #3 inboard
  • Rebuilt entire inboard batten system on main sail
  • Performed rig inspection; Hall Spars produced rig report
  • New freshwater pump and accumulators
  • New deck wash pump
  • New galley sink drain plumbing
  • Serviced galley refrigeration, deck fridges and bar freezer
  • New freezer compressors, plumbing and plates
  • New exterior deck cushions
  • Reconditioned navigation lights
  • Rebuilt hydraulic main sail
  • Reconditioned bottom by sanding and applied bottom paint
  • Removed shaft for reconditioning, polished bow, inspected shaft alignment
  • New cutlass shaft bearing
  • Painted aqua drive
  • Rewired bow thruster control switches
  • Fu11 service of tender
  • New tool storage in engine room
  • Varnished outside tables and cap rail
  • Varnished companionway and forward floorboards
  • New oil gasket on main engine

• 2016-2017:

  • Port “house sea water manifold” removed, cleaned, all bronze fittings and ball valves
  • replaced and re-instaIled
  • Intake raw water hose for freezer pump replaced
  • Intake raw water hose for crew head (salt water flush) replaced
  • Intake raw water hose from manifold to low pressure water maker pump replaced
  • Breather hose for raw water manifold replaced
  • Starboard engine raw water manifold cleaned and ball valves serviced
  • Deep clean of engine room bilges
  • All Racer filters replaced and bowls removed, cleaned and re-installed
  • 3 x Aft cabin black tank discharge
  • Thru-hulls replaced
  • All other thru-hulls serviced
  • All universal joints in rod steering system inspected and greased
  • All winch motor mountings inspected and tightened as necessary
  • Main engine cleaned and painted
  • Navigation equipment replaced, including all new cables run throughout boat and rig
  • Main bilge pump removed, housing cleaned, impeller replaced, mounting plate painted and re-installed
  • Hose from bilge to bilge pump replace

• 2013-2015:

  • Fully re-seamed decks (with deeper cut seams)
  • Un-stepped rig
  • Rig inspected
  • Furler service at Reckmann in Germany
  • Stripping and barrier coated bottom
  • Engine aligned
  • Cutlass bearing replaced
  • Rudder inspected (seals and bearings)
  • Running rigging upgraded
  • 2 x Replaced gensets
  • New prop

COMMENTS

RAVENCLAW, an exquisite blend of form meets function, was built by a seasoned yachtsman as his second Oyster. His objective was to create a vessel that was safe and comfortable for his large sailing family, with a shallow draft keel to allow for exploring the Chesapeake Bay and islands, while still presenting as a worthy competitor in Oyster Regattas. No expense was spared in the build, and all objectives were exceeded with flying colors. Her second and current owner has maintained and upgraded Ravenclaw without regard to cost. She has been lightly used in summer only and stored under cover for the off seasons.

Her interior features maple joinery with rich mahogany accents, beautiful teak floorboards and plush upholstery, all of which combine to accentuate the light, airy interior. Her upper salon and nav area offer expansive views via the deck saloon windows. The equally inviting lower saloon serves as a breakfast nook, reading and lounge area. Her three generous en-suite guest cabins, equipped with hideaway pipe berths for additional accommodations. New satin finished hardwood floorboards provide the finishing touch that sets RAVENCLAW apart from her sisterships. Generous crew quarters and galley forward naturally provide privacy and separation while ensuring the boat is configured for silver service.

Her spacious cockpit is outfitted to host a multitude of guests for apres-sail cocktails to spontaneous alfresco dining on a moonlit evening. A custom hard frame bimini was installed to better protect guests from the elements and improve all around visibility from the helm and seating area. RAVENCLAW is turnkey and has been immaculately maintained by a knowledgeable captain, and refit to the highest standards, she will not last long in today’s market.

• KEY FEATURES

  • Shallow draft keel
  • 3 Spreader carbon mast and boom
  • Main engine rebuilt with less than 600 hrs since
  • Hull painted 2021
  • Mast and Boom repainted 2019
  • New hard frame bimini 2022
  • New 16’ Walker Bay tender and 90hp engine 2023
  • Quantum sail inventory new 2019 (very lightly used)