WHITE SWAN
WHITE SWAN is an exceptionally well-kept Ferretti 960, maintained under the same owner–captain partnership since delivery, a rare continuity that reflects a meticulous standard of care throughout her life. Annual dry-docking, comprehensive technical inspections, and servicing exclusively by authorized Ferretti Yachts representatives ensure she is presented in outstanding mechanical and cosmetic condition.
Powered by twin MTU 16V 2000 engines delivering 2 × 2,630 HP, with just 1,460 engine hours, WHITE SWAN cruises comfortably at approximately 25 knots and reaches top speeds of 28–32 knots depending on load. Her 9,000-liter fuel capacity and 1,320-liter freshwater capacity provide excellent range and autonomy for extended cruising.
Designed to maximize outdoor living, WHITE SWAN offers generous exterior spaces ideal for both family cruising and entertaining. The expansive flybridge is a standout feature, complete with a bar and high stools, an eight-person dining table, a large lounge area, three sunbeds, and a dedicated crane for a jet ski. The aft deck evokes the atmosphere of a Custom Line 100, with a spacious al fresco dining area perfectly suited to relaxed meals underway or at anchor.
Accommodation is arranged for up to eight guests across four elegantly appointed cabins: two master cabins and two twin cabins, thoughtfully distributed between the main and lower decks to provide exceptional privacy. Large panoramic windows flood the interior with natural light, enhancing the yacht’s refined contemporary styling and spacious feel.
Also included in the sale is a custom Aermarine Siner G 460 tender, powered by a Yamaha outboard engine. Operated by a full professional crew, captain, mate, deckhand, and stewardess, WHITE SWAN is offered in true turnkey condition, ready for immediate private use or charter operation.
2026 Attached Works list
-
-
Service A/C pumps (internal and external circuit)
-
Service hydrophore pumps (24V / 220V)
-
Service grey and black water pumps
-
Inspect bilge pumps and replace if necessary
-
Inspect and, if necessary, replace the multipurpose manifold/branch connection serving the A/C, watermaker, and fire pump systems
-
Inspect multipurpose pump
-
Service IDROMAR watermaker high-pressure pump, including oil change and membrane inspection
-
Change oil on PARKER watermaker and replace fresh water filter / blue filter
-
Replace IDROMAR fresh water system filters (3 pcs – to be changed every 6 months)
-
Order watermaker filters as follows:
-
Order sea strainer baskets/filters for A/C seacocks, including cover gaskets
-
Order generator oil – 40 litres Castrol 15W40
-
Order generator consumables as follows:
-
Inspect and adjust flybridge canopy
-
Order blind motors – 4 pcs
-
Service side door, including compressor service or replacement if required
-
Replace starboard navigation light
-
Service dinghy lifting motor in garage
-
Repair starboard bow fairlead
-
Replace flybridge speakers
-
Carry out Megger test (insulation resistance test)
-
Inspect and service gangway
-
Flush A/C system and switch over to summer mode
-
Replace stern shore power inlets
-
Check A/C refrigerant (Freon)
-
Replace copper hose elbows/fittings at the couplings – 2 pcs
-
Service fire extinguishers
-
Service fixed fire extinguishing system in engine room
-
Certification of SART and EPIRB
-
Carry out compass deviation check
-
Organize dry dock arrangements
-
Polish stainless steel parts
-
Polish windows/glass surfaces
-
Polish propellers and shafts
-
Replace zinc anodes on propellers, hull, platform, and garage
-
Paint garage hatches/covers
-
Carry out gelcoat repairs
-
Repair port side fuel flap/door
-
Carry out repairs around anchor plates/pads
-
Repair/reseal silicone around windows
-
Replace platform seal/gasket
-
Service generators (consumables) and inspect glow plugs
-
Service platform cylinders
-
Top up thruster oil and inspect system
-
Repair Lift Foil Bluetooth system
-
Replace stickers/decals on satellite antennas
-
Repair flooring in crew bathroom
-
Replace hinges on cabinet under sink in crew area
-
Full service of dinghy, including consumables
-
Re-glue/re-fix handles on dinghy tubes
-
Carry out gelcoat repairs on dinghy hull
-
Update paper charts with all applicable corrections and amendments
-
Change engine oil and filters
-
Perform test run / sea trial after dry dock
